homeaholic.net

Tag: plunger

  • Ways To Clear Clogged Tub Drain Standing Water

    CLOGGED TUB DRAIN STANDING WATER

    A clogged tub drain standing water creates trouble in the home. If the water is always reaching your feet or even higher every time you take a shower, then you most likely have a clogged bathtub drain problem. It is a bigger problem to fix but not impossible. Mostly the hairs in the strainer are clogging the bathtub. It is important to fix this issue as soon as possible because standing water can create more problems for your home and bathroom.

    CLOGGED TUB DRAIN STANDING WATER

    HAZARDOUS STANDING WATER

    Standing water creates a spawning pool for mosquitoes which can be a nuisance to you if allowed to reach its adult form with the continuous breed. Standing water causes mold and mildew to form which is a breathing hazard for anyone in the home.

    WAYS TO UNCLOG CLOGGED TUB DRAIN STANDING WATER

    A clogged bathtub drain can be removed in several ways such as by using a Plunger or by cleaning the strainer or stopper and other methods. If after trying these all the tub is still clogged, then use a Snake to remove the drain.

    Method 1

    •Cleaning the Stopper

    If the water is draining slowly, then remove the strainer or stopper and clean out any junk.

    Method 2

    •Baking soda and vinegar

    Baking soda and vinegar

    Baking soda has a cleaning power. It gently wears away strains. When mixing with vinegar, it creates a carbonic acid, a weak acid that boosts the corrosive action of vinegar. As a weak alkali, baking soda neutralizes acids in odor molecules to eliminate the potent smell. Therefore,
    try baking soda. First, remove the stopper and pour boiling water into the drain with baking soda and vinegar. Wait about 15 – 20 minutes and then flush with hot water.

    Method 3

    •Using the Plunger

    Using the Plunger

    Mostly bathtub clogs are caused by unwanted hairs, soap scum or other bathroom products. These are easily visible and therefore can easily be cleared with your fingers.

    If after removing hairs and other visible products there is still a problem then use a Toilet Plunger to remove the blockage. A plunger is a tool which is used to remove blockages in drains and pipes.

    How to use the Plunger

    Following are the steps of using a plunger to unclog the bathtub.

    Fill the bath tub with few inches of water.

    Start plunging your bath tub’s drain. You have to use some force here. After about ten plunges, check if the dirty water and gunk are coming out of the drain.

    If the pipe looks cleared, then run some hot water to clear any residue remaining.

    If no positive results found, then you should use a different method.

    Method 4

    •Snaking a Tub drain

    If you have tried everything but the problem is still not resolved, then a Plumbing Snake is the last resort. Plumber’s Snake is a flexible auger which can be used for cleaning sink and bathtub drains.

    STEPS TO SNAKE A TUB DRAIN

    Feed the snake down through the overflow plate opening and turn the handle on the drum that contains the coiled up snake.

    Keep pushing more of the snake into the drain until you feel some resistance.

    Continue turning the handle until you feel the clog starts to break up.

    The snake will either break the clog, or your turning will hook the end of snake onto the clog, and you can pull it out.

    Try running water down the drain while moving the snake in the drain. If the clog is clear, the drain will run free. However, if the clog is not cleared, you may have to repeat the process to clear the drain.

    HOW TO AVOID A CLOGGED BATH-TUB DRAIN

    It is better to prevent the clog from happening in the first place. Instead of spending time and effort when the things get backed up, put effort on a monthly basis.

    Keep your Bathtub drains free flowing by following the tips below:

    Pour boiling water on a monthly basis.

    Pour half cup of baking soda into the drain and then add a half cup of vinegar. After few minutes rinse it with a hot cup of vinegar. It will not only clean the drain but clean smelling as well.

    Don’t drop pieces of soap by assuming that they will dissolve. It is how soap builds up in the drain.

    For slow drains in old houses, pour a bottle of bleach down the tub drain once a month in the evening. In the morning, heat up a tea kettle and pour one gallon of water down the clogged drain.

    The last option is to call the plumber if the situation is getting worse.

  • How to Unclog a Toilet with a Plunger

    Clogging is a part of any sanitary system in one’s home. Whether it’s in your toilets, kitchen, or even in your garden drain. This mind pounding problem is messy and can be fixed by yourself or by a handyman if it is stubborn. The leakage system can be fixed if you have important required tools like ‘Plunger.’ This tool plays a great role in unclogging any blockage in the drain. Here you will find how to unclog a toilet with a plunger.

    What’s the problem in the flush drain you actually found? Is it a leakage, blockage, or some other issue? If you flush your toilet drain and the water is staying in a bowl, you might face a clogging in your toilet. If you want to fix it out by your own, you are definitely a brave person to deal with that messy stuff.

    So the question is how to unclog a toilet with a plunger. You must have this tool in your home not necessarily if you have clogging issues, but you can keep it as a backup. You can clear clogs yourself without having to pay a plumber.

    Here we have a solution to fix this problem with the help of Plunger. Check this out step by step process to get rid of this problem.

    Make Preparations before Unclogging a Toilet

    Make sure you have a thicker toilet papers and extra towels in your home to place them on the floor around the flush. If you have any spare or ragged clothes in your closet, consider wearing those to avoid any stains and filthy water.

    Next, put a thick or probably the rubber gloves on your hand or even covering your hand till elbow. You might need to put your whole arm inside the flush bowl to detect a clog reason. Keep children away while doing this activity.

    How to unclog toilet with a plunger

    This tool comes in different sizes and quality, pick the best quality so that it cooperate with your for a longer period. Plunger consists of a rubber flange at the bottom which forms a seal. Do not use the little shabby suction-glass sort of plunger. These will frequently not work.

    Affirm that your plunger makes a tight seal. You have to wrap an old cloth around the finish of the plunger to stop any leakages.

    Run the plunger under boiling hot water before using it. This will mollify it up, which will help with make a seal.

    First Step: Insert Plunger into the Toilet Bowl

    Embed the plunger into the bowl. Ensure the plunger totally covers the gap. The plunger ought to be submerged in water to be viable. It is imperative to push and to pull with water, not air. Add water from the sink to the bowl if essential.

    Pump the plunger over the opening. Begin gradually at initially since the main drive will push air into the bowl. Push down, then draw up forcefully to lose the obstruct and release it. Pump it vigorously pushing and pulling until the water starts to deplete or drain. It might take 15 to 20 times before it unclogs. Be tolerant, insofar as you’re certain there’s no hard question, diving alone regularly suffices. It won’t work promptly but rather would regularly work after a couple rehashed endeavors/flushing, with every exertion constituting of many plunging.

    How to Unclog a Toilet with a Plunger

    Second Step: Check toilet drain again by pressing flush button

    If the water is draining eventually and not rushing fast enough like a regular flush process, you have to keep plunger inside in the bowl, so it blocks the air, and sudden push will unclog it if there is stubborn substance. Unclogging might take enough time, and it would be a test of your patience level, so keep trying until the water rushes into the toilet without any pause.

    What are the Causes of Clogging

    What are the causes of clogging

    Although there are certain reasons for the toilet clogging and we know that this mind pounding irritating issue can cause due to certain reasons. We have some most common causes listed below.

    1. First generation toilets

    This happens to old installed toilets in homes. However, if you keep your toilet well-flushed, then this might not happen. Make sure you constantly be checking your toilet as it got of age and its life is almost finished. Due to it’s wrecking a life, you may consider replacing it with a new one.

    2. Waste obstruction

    If the waste is not properly flushed off, you may suffer from clogging a toilet. If you throw toilet paper in the bowl, make sure you flush it out instead of letting is dissolve. Heavy wastes and non-flush substance can cause clogging. If you are renovating your toilet, make sure you cover the toilet with the lid so that any stubborn building particles or pieces don’t fall into it. Moreover, avoid disposal of hair in the bowl as hair are common clogging substance in the toilet.

    How to Prevent Your Toilet from Clogging

    Prevention is better than cure. It is important that you keep your toilets maintained and frequent examination is important. Keep an eye on children to avert them not to throw and non-flush material in the toilet.

    Use cleaning agent in a toilet to keep the flow of water running instead of giving huge bucks to the plumber. The “Affability Flush” is a simple answer for forestalling regular clogging.

    In the first place, flush the underlying waste. At that point, flush the bathroom tissue separately. This has a tendency to be a typical remove any obstruction bothering the toilet.

    Save